Please note, that most cameras won’t be able to shoot such short intervals. For cameras which do not require an AF-Signal to be sent before the release, you can set the AF-Time to 0 in the settings, then the minimum interval will be 0.3 secs. It was developed Made in Germany by Gunther Wegner of LR. By default, the minimum shutter time will be calculated as (Shutter_Release_Time + AF_Time + 50ms) rounded up to the next 100ms. The LRTimelapse Pro Timer 3 is one of the most advanced and flexible camera intervalometers. *) For cameras which do not require the AF signal to be sent before the shutter release. Please do not operate in Rain or expose the device directly to water. While the optical glass cover of the LRT Pro Timer 3.0 provides a good protection, the LRT Pro Timer is not waterproof.The timer needs to be set into update mode by double clicking the reset button. Firmware Updates via UF2 files which can be just dropped on a drive, which will be mounted after connecting the timer to a computer (PC or Mac).20h, 20,000 camera releases (interval: 4 seconds, display turned on). Operation time with the battery fully charged ca.Single Exposure Bulb-Time up to 24 hours, timelapse bulb time max.Interval step: 0.1 secs or even 0.01 secs if required.In very cold conditions, best keep the LRT PRO Timer inside a backpack in order to not drain or damage the battery due to the cold. I am using it all the time to shoot timelapses. Tested temperature span: -20☌ – +40☌ – don’t leave the timer exposed in a car in direct sunlight. The LRTimelapse Pro Timer 2.5 is an advanced intervalometer created by LRTimelapses developer, Gunther Wegner.2 eyelets on the case to pass a cord or velcro strap through for fixing on a tripod.It was created and Made in Germany by Gunther Wegner, a pioneer of time-lapse photography and designed especially for the discerning Time-lapse and Astro photographer. 2 hot shoe sockets on the case in different angles for mounting directly on the camera. About this item The Time-lapse Pro Timer 2.5 is one of the most advanced and flexible camera intervalometers ever developed.2 Camera Ports with standardized 2.5mm TRS female jacks.Battery Powered (CR1220 Button Cell) Real-Time Clock.Built in 500mAh LiPo battery (can be upgraded to 800mAh by the user), chargeable via micro-usb.128×64 pixel black and white OLED display shielded with a precision optical glass cover.The LRT Pro Timer works with any camera for which there is a standard release cable (DSLR / DSLM, Nikon, Canon, Sony, Fuji, Olympus, Leica and many others). The LRTimelapse Pro Timer 3 is the latest and greatest timelapse remote to hit the market. It features a small and lightweight case, which can be attached directly to the hot shoe of the camera at two different angles or with corresponding eyelets to the tripod.Ī standard camera release cable is not included, it has to be purchased separately if required.Ĭompared to its predecessor the LRT Pro Timer 3 offers a bigger display (twice the resolution, nearly 3 times the size), a high precision optical glass cover to protect the display, a slick aluminum knob for more precise rotation and tactile indicators for camera port numbers on the housing. The integrated Real Time Clock allows for timed recordings and periodic shooting at specific time spans each day. can be saved in the settings of the LRT Pro Timer. All lights on the can be switched off – essential for shooting in darkness.ĭefault values for interval, number of shots etc. Optionally, the camera can be operated in Bulb mode (Astro photography) for timelapse and single exposures. Interval ramping allows smooth adjustment of the interval over an adjustable time while shooting – also in combination with motion control hardware. Intervals are adjustable in 0.1 second increments. That means your camera will be operable while shooting! It supports two cameras, timed and periodic shooting, improved support for Mirrorless Cameras, Flashlight feature for foreground illumination and most important: it allows you to shoot with the shortest dark times possible. 180º and start them both to work at the same time LRT Pro Timer would then start taking the Timelapse whilst the genie is gyrating. It has a crisp OLED display which is readable in all conditions and a single knob for easy and ergonomic operation – even in the dark and with gloves. Set the LRT Pro Timer to shoot as per normal, set the Genie Mini to perform the move you want it to do, i.e. The LRT Pro Timer is a small and light intervalometer with a build in Li-Ion Battery which can be charged via USB and holds up to 20 hrs. It was developed “Made in Germany” by Gunther Wegner, one of the pioneers of timelapse photography and designed with the needs of professional timelapse photographers and ambitious amateurs in mind. The LRTimelapse Pro Timer 3 is one of the most advanced and flexible camera intervalometers.
0 Comments
Leave a Reply. |